BeautifulNameX
Active Member
ETA: I ended up just getting my hair cut the next day. . .
My pressing results are still up (first two pictures), the only reason why I posted that was so people can see the results Keracare silk n seal got me with my 4B. (Used the serum on wet before I blow dried and the liquid before flat ironing my blow dried hair) Thats all I used too. (only posed this because I rarely use heat and I know a lot of people are looking at different products to get good pressing results and I really liked my with Silk n Seal didnt wanna praise the product with out the proof)
Disaster (third picture) was that my blow dryer broke like halfway through. I didnt even try to get it as straight (too much heat plus I was thinking about gettining it cut the next day anyway.) and I left this picture up so u can kinda (you really cant even tell for real) kinda see how I unevenly trimmed to give you an opinion of I should have got it fixed or not.
original post.
Ok, my hair was getting on my nerves I dont know what was going on, It kept breaking off no matter what I did I havent used heat. . I baggie alot always. I dont know. plus I had nasty tree looking splits and mid strand holes yuck. So I cut it. I just cut what I felt needed it I took each cornrow out and just cut. . . some parts I cut as much as 4 inches so now its an un even hot mess all over. even in a fro. . . so tomorrow Im getting it cut I dont know how (Ima just tell them I meesed it up and to cut it so when It grows out it wouldnt look a mess.
Or should I just grow it out and cut it later? What do you think caused it I got it flatironed and not blow dried in Jan. . I took swimming lessons for six weeks twice a week in april and march (eta March not may) I DC every time though. . . I just got out ok kinky twists. . . Maybe its from airdrying all the time. l but isnt that supposed to be the best for long hair growth?
but on the bright side I been trying to come up with a permeant reggie anyways i found my staples for if I want to use heat to press. Its was and DC then put in sections spray with nexxus split end mend heat protex then apply split end mend leave in and Keracare Silk n seal and blow dry in sectoins. . . My hair was so soft and getting straight it felt lit it had a protection on every strand. . . .
until the disaster my Andis 1875 blow dryer with the long comb broke like fell apart. . . so I used this conair thing to proceed. . . it wasnt was good Ladies Im in need of good blow dryer (thats the least of my worries though) anyway I sprayed liquid silk n seal through out and flat ironer with my FHI and it was sooo silky and pretty (on the parts that actually got dry) my roots were puffy but the rest got straight on the other parts. I only flat Ironed it so I can get it cut tomorrow.
SHAMPOO/DC Mizani Thermasmooth
LeaveIn Nexxus Splitend Mend
HeatProtecter Nexxus Split end mend Heat protex
Serum Silk n Seal
SHINE Silk n Seal liquid
Flatiron FHI
Blowdryer a Cheap ol Andis that I loved (R.I.P)lol and some piece of crap by conairo
But yea I dont know why I kept getting that breakage and having all those splits. . . This Plus my always quick to do something (like randomly cut my hair) is setting me back. . . Anyway what should I do about my jacked up cut Get it professionally cut?
ETA u really cant tell from my pics how messed up I cut it its like way shorter though
Part of me wants to relax but noooo I like my natural but not my splits and breakage. . .
Sorry I talk to much
the first two r my keracare results. the other side is straight but not as straight because my dryer broke. its soft though. and i want yall to see how in even I cut it. I was sl back in Jan when i got it flat ironed
My pressing results are still up (first two pictures), the only reason why I posted that was so people can see the results Keracare silk n seal got me with my 4B. (Used the serum on wet before I blow dried and the liquid before flat ironing my blow dried hair) Thats all I used too. (only posed this because I rarely use heat and I know a lot of people are looking at different products to get good pressing results and I really liked my with Silk n Seal didnt wanna praise the product with out the proof)
Disaster (third picture) was that my blow dryer broke like halfway through. I didnt even try to get it as straight (too much heat plus I was thinking about gettining it cut the next day anyway.) and I left this picture up so u can kinda (you really cant even tell for real) kinda see how I unevenly trimmed to give you an opinion of I should have got it fixed or not.
original post.
Ok, my hair was getting on my nerves I dont know what was going on, It kept breaking off no matter what I did I havent used heat. . I baggie alot always. I dont know. plus I had nasty tree looking splits and mid strand holes yuck. So I cut it. I just cut what I felt needed it I took each cornrow out and just cut. . . some parts I cut as much as 4 inches so now its an un even hot mess all over. even in a fro. . . so tomorrow Im getting it cut I dont know how (Ima just tell them I meesed it up and to cut it so when It grows out it wouldnt look a mess.
Or should I just grow it out and cut it later? What do you think caused it I got it flatironed and not blow dried in Jan. . I took swimming lessons for six weeks twice a week in april and march (eta March not may) I DC every time though. . . I just got out ok kinky twists. . . Maybe its from airdrying all the time. l but isnt that supposed to be the best for long hair growth?
but on the bright side I been trying to come up with a permeant reggie anyways i found my staples for if I want to use heat to press. Its was and DC then put in sections spray with nexxus split end mend heat protex then apply split end mend leave in and Keracare Silk n seal and blow dry in sectoins. . . My hair was so soft and getting straight it felt lit it had a protection on every strand. . . .
until the disaster my Andis 1875 blow dryer with the long comb broke like fell apart. . . so I used this conair thing to proceed. . . it wasnt was good Ladies Im in need of good blow dryer (thats the least of my worries though) anyway I sprayed liquid silk n seal through out and flat ironer with my FHI and it was sooo silky and pretty (on the parts that actually got dry) my roots were puffy but the rest got straight on the other parts. I only flat Ironed it so I can get it cut tomorrow.
SHAMPOO/DC Mizani Thermasmooth
LeaveIn Nexxus Splitend Mend
HeatProtecter Nexxus Split end mend Heat protex
Serum Silk n Seal
SHINE Silk n Seal liquid
Flatiron FHI
Blowdryer a Cheap ol Andis that I loved (R.I.P)lol and some piece of crap by conairo
But yea I dont know why I kept getting that breakage and having all those splits. . . This Plus my always quick to do something (like randomly cut my hair) is setting me back. . . Anyway what should I do about my jacked up cut Get it professionally cut?
ETA u really cant tell from my pics how messed up I cut it its like way shorter though
Part of me wants to relax but noooo I like my natural but not my splits and breakage. . .
Sorry I talk to much
the first two r my keracare results. the other side is straight but not as straight because my dryer broke. its soft though. and i want yall to see how in even I cut it. I was sl back in Jan when i got it flat ironed
Attachments
Last edited: